Paver Calculator
Calculate pavers, base and bedding sand.
Open calculator →Estimate soil volume for a rectangular raised bed or garden area using its dimensions and target fill depth.
Estimate soil volume for a rectangular raised bed or garden area using its dimensions and target fill depth.
Measure the inside length and width of the bed and the actual depth you plan to fill. For layered beds, calculate each layer separately when materials differ.
Convert depth to feet, multiply length × width × depth, and convert cubic feet to cubic yards when ordering bulk soil.
A raised bed may contain compost, topsoil, planting mix, or drainage material. Do not treat every layer as the same material; calculate each layer independently.
Loose soil and organic amendments can settle after watering and time. Your allowance should account for the material and the finished level you need.
Bulk is convenient for larger volumes. Bagged products are easier for small beds but should be compared by cubic-foot yield rather than bag count alone.
Use the actual product dimensions, package coverage, material density, installed depth, and current local price whenever those values are available. Measure the project in smaller sections when the shape is irregular, and keep fixed costs separate from area-based quantities. For a large purchase, compare the calculator result with the supplier’s own coverage or takeoff before ordering.
The most common errors are mixing inches and feet, using nominal dimensions instead of actual product dimensions, forgetting waste or overage, treating volume and weight as interchangeable, and assuming a universal installation depth. Enter the values from your actual product and project specification whenever possible.
A 4 × 8 ft raised bed filled 12 inches deep holds 32 cubic feet, or about 1.19 cubic yards before an allowance.
| Bag volume | Approx. bags per cubic yard |
|---|---|
| 1.5 cu ft bag | 18 bags per cubic yard |
| 2 cu ft bag | 14 bags per cubic yard |
| 3 cu ft bag | 9 bags per cubic yard |
Reference values are planning aids. Product specifications and local conditions take precedence.
At 12 inches deep, the bed holds 32 cubic feet, or about 1.19 cubic yards before an allowance.
The target fill level depends on the bed design and how much the material will settle. Leave room where appropriate for watering and mulch.
Calculate each material as its own layer if you want separate purchase quantities.
Yes, but the best approach is to divide the project into measurable sections and combine the results. Irregular edges, curves, openings, and changes in depth can make a single rectangular measurement less accurate.
Verify the product label or manufacturer coverage, actual dimensions, density or package yield, required installation depth, and supplier delivery terms. For structural or regulated work, also verify the project specification and local requirements.